nouveaux produits
Trouver TUYAU D'ACIER À SOUDER X52, TUBE EN ACIER EFW X52, TUBE EN ACIER EFW L360Q dans le répertoire Industry, Reliable Fabricant / Fournisseur / Factory de Chine
Type de paiement: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF,FCA,CPT |
Quantité de commande minimum: | 1 Piece/Pieces |
Délai de livraison: | 25 jours |
Modèle: 24-48"
He Bei GuangHao Pipe Fittings Co., LTD Spécialisée dans la production de tuyaux en acier et de raccords de tuyauterie
Production principale: tuyau anticorrosion de conservation de la chaleur, tuyau sans soudure, tuyau en acier ERW/HFW, tuyau en acier LSAW, tube en spirale, raccords de tuyauterie en acier soudés bout à bout , brides industrielles, tuyaux en acier, coudes à souder bout à bout, tés bout à bout, raccords forgés, etc.
Bienvenue pour discuter
Type de raccords forgés/raccords de tuyauterie en acier soudés bout à bout : coude, croix, coude de rue, té, accouplement, demi-accouplement, capuchon, bouchon, douille, union, sortie, mamelon sage, bouchon de taureau, insert de réducteur, mamelon de tuyau, etc.
Steel Grade | Mass fraction, % based on heat and product analyses a,g | ||||||
---|---|---|---|---|---|---|---|
C | Mn | P | S | V | Nb | Ti | |
max b | max b | max | max | max | max | max | |
Seamless Pipe | |||||||
X52 | 0.28 | 1.4 | 0.3 | 0.3 | d | d | d |
Welded Pipe | |||||||
X52 | 0.26 | 1.4 | 0.3 | 0.3 | d | d | d |
Steel Grade | Mass fraction, % based on heat and product analyses | Carbon Equiv a | |||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
C | Si | Mn | P | S | V | Nb | Ti | Other | CE IIW | CE Pcm | |||||||||||
max b | max | max b | max | max | max | max | max | max | max | ||||||||||||
Seamless and Welded Pipe | |||||||||||||||||||||
X52N | 0.24 | 0.45 | 1.4 | 0.025 | 0.015 | 0.1 | 0.05 | 0.04 | d,e,l | 0.043 | 0.25 | ||||||||||
X52Q | 0.18 | 0.45 | 1.5 | 0.025 | 0.015 | 0.05 | 0.05 | 0.04 | e,l | 0.043 | 0.25 | ||||||||||
Welded Pipe | |||||||||||||||||||||
X52M | 0.22 | 0.45 | 1.4 | 0.025 | 0.015 | d | d | d | e,l | 0.043 | 0.25 | ||||||||||
a. SMLS t>0.787”, CE limits shall be as agreed. The CEIIW limits applied fi C > 0.12% and the CEPcm limits apply if C ≤ 0.12%, b. For each reduction of 0.01% below the specified max. concentration for carbon, and increase of 0.05% above the specified max. concentration for Mn is permissible, up to a max. of 1.65% for grades ≥ B, but ≤ = X52; up to a max. of 1.75% for grades > X52, but < X70; and up to a maximum of 2.00% for X70., c. Unless otherwise agreed Nb = V ≤ 0.06%, d. Nb = V = Ti ≤ 0.15%, e. Unless otherwise agreed, Cu ≤ 0.50%; Ni ≤ 0.30% Cr ≤ 0.30% and Mo ≤ 0.15%, f. Unless otherwise agreed, g. Unless otherwise agreed, Nb + V + Ti ≤ 0.15%, h. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 0.50% Cr ≤ 0.50% and MO ≤ 0.50%, i. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 1.00% Cr ≤ 0.50% and MO ≤ 0.50%, j. B ≤ 0.004%, k. Unless otherwise agreed, Cu ≤ 0.50% Ni ≤ 1.00% Cr ≤ 0.55% and MO ≤ 0.80%, l. For all PSL 2 pipe grades except those grades with footnotes j noted, the following applies. Unless otherwise agreed no intentional addition of B is permitted and residual B ≤ 0.001% . |
Pipe Grade | Tensile Properties – Pipe Body of SMLS and Welded Pipes PSL 1 | Seam of Welded Pipe | ||
---|---|---|---|---|
Yield Strength a | Tensile Strength a | Elongation | Tensile Strength b | |
Rt0,5 PSI Min | Rm PSI Min | (in 2in Af % min) | Rm PSI Min | |
X52 | 52,200 | 66,700 | c | 66,700 |
Tuyau pour résister à un essai hydrostatique sans fuite à travers le cordon de soudure ou le corps du tuyau. Les dégauchisseuses n'ont pas besoin d'être testées hydrostatiquement à condition que les sections de tuyau utilisées aient été testées avec succès.
Aucune fissure ne doit se produire dans aucune partie de l'éprouvette et aucune ouverture de la soudure ne doit se produire.
Les critères d'acceptation pour l'essai d'aplatissement doivent être :
Groupes de Produits : Tuyaux en acier > Tuyau d'acier ERW / HFW